[ Leapers ] [ Specter Gear ] [ Mil-Force ] [ Bushrag Camo ] [ Wiley X ]

Rifle & Shotgun Slings

CQB Sling
Emergency Release Buckle (ERB) Option

In response to customer demand, CQB Solutions is pleased to offer an Emergency Release Buckle (ERB) option for all of our CQB Slings. The ERB option allows users to rapidly and efficiently disengage the slung weapon from their body should the sling become entangled with an obstacle or if an opponent should try to use the sling to the disadvantage of an operator during a weapon retention situation.

CQB AR-15 / M-16A2 CQB Sling

We have models designed to fit standard fixed stock AR-15 / M-16A1 & M-16A2 type rifles as well as most variant configurations.  

# 004 fits standard AR-15 / M-16A1 / M-16A2 rifles with full length standard sized handguards.
# 004 also fits AR-15 "Sporter" carbines with fixed stocks and short CAR-15 type handguards.
# 006 fits AR-15 / M-16A1 / M-16A2 / M-203 with side mounted front sling swivels. 
# 102 fits AR-15 "Sporter" carbines with fixed stocks and short M-4 type large oval handguards.

These slings are 1.25" wide, available in Black, Olive Drab or Desert Tan, left or right hand, and with or without an Emergency Release Buckle (ERB). Please specify when ordering

CQB M-4 / CAR-15 CQB Sling

We have several models designed to fit collapsible stock CAR-15 / M-4 type carbines. 

# 007 fits CAR-15 carbines with collapsible stocks and standard sized round handguards
# 008 fits M-4 carbines with collapsible stocks and large oval M-4 handguards
# 009 fits CAR-15 / M-4 variants with collapsible stocks and a side mounted front sling swivels

These slings are 1.25" wide, available in Black, Olive Drab or Desert Tan, left or right hand, and with or without an Emergency Release Buckle (ERB). Please specify when ordering.  

Note: If you have one of the later model Colt Sporter type carbines with the short 16" barrel and fixed AR-15 type stock you will need to order the AR-15 CQB Sling. The only difference between the two slings is the rear sling adapter. 

HST Universal High Speed Transition Sling

The High Speed Transition (HST) Sling is designed exclusively for high intensity dynamic entry operations where rapid cross shoulder and secondary weapon transitions are crucial to survival. While not as versatile as the CQB or SOP Slings, the HST Sling excels in the dynamic entry role. 

Used on a weapon with a side receiver sling mount, the body loop secures the sling to a single mounting point. This arrangement allows the operator to simply arc the buttstock over the sling for an easily accomplished cross shoulder transition. Should a secondary weapon transition be required the weapon drops naturally to the offside, muzzle down, clearing a path to the sidearm and allowing an unobstructed secondary weapon transition

CQB HK Sling

This 1" wide sling is designed to fit HK MP5 / HK94, HK53, HK91 / G3, & HK 93 type weapons. This sling utilizes the existing rear sling loops and is furnished with a CMC front sling hook. We also offer an additional version to fit G36 type weapons, which is provided with front and rear CMC sling hooks. These slings are available in Black, Olive Drab or Desert Tan, with or without an Emergency Release Buckle (ERB). Please specify when ordering. 

CQB AK-47 CQB Sling

We have two models designed to fit AK-47 type weapons. 

# 018 fits AK's with fixed stocks & front side mounted sling loops (Configuration shown here)
# 118 fits AK's with folding stocks & front & rear side mounted slings loops

This sling is 1.25" wide, available in Black, Olive Drab or Desert Tan and with or without an Emergency Release Buckle (ERB). This sling is available in right hand versions only at this time.  

CQB Universal CQB Sling

Our Universal CQB Slings are designed to fit weapons with existing factory or aftermarket side mounted front & rear sling loops.

Our 1.25" version fits weapons such as the Steyr AUG or the M-4 pictured to the left, which is equipped front & rear with 1.25" G.G.&G. sling swivels.

Our 1" version fits weapons with 1" factory sling loops such as the Benelli M1 or M3 which have 1" side mounted front & rear sling loops. For weapons with 1" sling loops order the (#013). For 1.25" sling loops order the (#014). These slings are available in Black, Olive Drab or Desert Tan & with or without an Emergency Release Buckle (ERB). Please specify when ordering. 

CQB M14 / M1A Sling

CQB Mossberg 500 CQB Sling

We have models designed to fit Mossberg 500 shotguns with conventional fixed stocks (#046) as well as Mossberg 500 shotguns with the Mossberg factory reduced length of pull stock (#047). This sling is 1.25" wide, available in Black, Olive Drab or Desert Tan, right or left hand, and with or without an Emergency Release Buckle (ERB). Please specify when ordering. 

  HST FN P90 High Speed Transition Sling

The High Speed Transition (HST) Sling is designed exclusively for high intensity dynamic entry operations where rapid cross shoulder and secondary weapon transitions are crucial to survival. While not as versatile as the CQB or SOP Slings, the HST Sling excels in the dynamic entry role. 

Used on a weapon with a side receiver sling mount, the body loop secures the sling to a single mounting point. This arrangement allows the operator to simply arc the buttstock over the sling for an easily accomplished cross shoulder transition. Should a secondary weapon transition be required the weapon drops naturally to the offside, muzzle down, clearing a path to the sidearm and allowing an unobstructed secondary weapon transition

Tactical Vest, TAC Holsters & Belts

Tactical Operations Belt

Our Tactical Operations Belt is constructed from two layers of heavy duty 2" scuba webbing which makes for a belt that is flexible and comfortable but still highly resistant to edge rolling. It features a heavy duty 2" side release buckle with an easily accessed adjustment system which allows for 4 inches of adjustment. The belt is fully lined with velcro pile on the inside which is compatible with the wrap around belt loops used on all of our belt mounted accessories. These belts are currently available in black and olive drab.   

M1 MK I Chest Carrier

Chest carriers are an excellent load bearing concept. Not as cumbersome as a full vest, good balance characteristics, very stable during movement, and comfortable while seated in a vehicle. However, nearly all chest carrier designs are intended for military applications. If your operational profile doesn't include carrying 8-12 spare magazines, as well as additional sustainment gear, you often end up with a rig that's much bulkier than you need.

Law enforcement operations, whether conventional or tactical, rarely call for such a load out. In our experience, the standard law enforcement carbine ammo loadout is (4) 30 round magazines. (1) in the weapon and (3) spares. 

With this loadout in mind, we designed this chest carrier specifically to meet law enforcement needs. Additionally, we've added a good degree of flexibility and modularity so the carrier can be tailored for your specific needs, while at the same time providing you with a rig that's trim, compact, comfortable, and mission specific.

Features:

• The magazine pouches feature adjustable flaps which allow either (3) 30 round 5.56mm magazines, (3) 20 round 7.62NATO type magazines, (3) 30 round AK-47 magazines or (6) 30 round 9mm SMG magazines to be carried in the magazine pouch assembly.
• 2 slot modular strips on each side of the magazine pouch assembly allow attachment of additional pouches such as cuff pouches, OC pouches, radio holders, baton holders, flashlight pouches, etc. These pouches are available elsewhere in our catalog.
• The 2" wide unpadded adjustable shoulder straps distribute the load nicely, while minimizing bulk and interference with shouldering of the long gun.
• The shoulder straps and back strap feature heavy duty side release buckles at all attachment points for rapid disengagement from the rig.
• The rig back face is lightly padded for comfort.
• As with all of our products, this item is made in the USA using only top quality materials and manufacturing procedures. 
• Available in black or olive drab.

APEX Series Tactical Thigh Holster

This tactical thigh holster is permanently attached to a vertically adjustable quick disconnect (QD) hanger strap to suspend the holster below the belt line and features 2 adjustable 2" leg straps to secure the holster to the upper thigh.

Constructed from 4 layers of heavy duty ballistic nylon with a 2 layer 1000 denier cordura nylon outer shell, these holsters also feature an adjustable alloy thumb break snap with a hook and loop closure lockout strap to prevent thumb break operation during vigorous activities, such as rappelling or low crawling. All stitches are made with heavy duty mil-spec #69 or #92 nylon thread and are double stitched in low stress points and quadruple stitched at all high stress points.     

The vertical hanger strap is constructed from 3 layers of heavy duty 2" scuba webbing with hook and loop adjustment pads allowing approximately 6" of additional drop adjustment. The vertical hanger strap also features a heavy duty 2" side release buckle which allows for rapid removal or attachment of the holster without having to remove your belt.   

The fully adjustable double leg straps are made with comfortable, yet durable, 2" webbing with heavy duty side release buckle closures and heavy duty elastic loops to allow for expansion of the thigh straps during movement. The leg straps also feature 2 rows of imbedded rubber stitching on the inside to prevent shifting and movement of the holster. Both leg straps are removable and the vertical hanger strap features 3 channels for routing the attachment straps to insure a perfect fit for the user.  

Available in Black and Olive Drab.

We currently have versions available for: 

1911A1, M9 Beretta 92/96, Glock 17/22/31, Glock 20/21, SIG P226/P220, P35 Hi-Power, HK USP9/USP40, HK USP45